Skip to content

Harvesting

Data discovery gets more interesting once multiple catalogs and services share their resources.

Harvesting is the process of ingesting metadata from remote sources and storing it locally in the catalog for fast searching. It is a scheduled process, so local copy and remote metadata are kept aligned.

The following sources can be harvested:

Mechanism overview

The harvesting mechanism relies on the concept of a universally unique identifier (UUID). This is a special id because it is not only unique locally to the node that generated it but it is globally unique. It is a combination of :

  • the network interface MAC address,
  • the current date/time
  • and a random number.

For every new record, a UUID is generated and assigned to it.

Another important concept behind the harvesting is the last change date. Every time you change a metadata record, the last change date is updated. Just storing this parameter and comparing it with a new one allows any system to find out if the metadata record has been modified since last update.

These two concepts allow catalogs to fetch remote metadata, check if it has been updated and remove it locally if it has been removed remotely. UUIDs also allowed cross catalog harvesting in case B harvests from C and A harvests from B.

Harvesting life cycle

When a harvester is created, there is no harvested metadata. During the first run, all remote matching metadata are retrieved and stored locally. For some harvesters, after the first run, only metadata that has changed will be retrieved.

Harvested metadata are (by default) not editable for the following reasons:

  1. The harvesting is periodic so any local change to harvested metadata will be lost during the next run.
  2. The change date may be used to keep track of changes so if the metadata gets changed, the harvesting mechanism may be compromised.

Metadata properties (like categories, privileges etc...) on harvested metadata records can be updated but will be updated on next run.

Note

if you really want to edit harvested metadata records and aren't worried by the possible issues described above, there is now a configuration setting which will permit this. See Metadata import for more details.

Another option would be to assign the harvested records to the local catalog and then modify them. For the time being, no interface allows to change record's source catalog.

The harvesting process goes on until one of the following situations arises:

  1. An administrator stops (deactivates) the harvester.
  2. An exception arises. In this case the harvester is automatically stopped.

When a harvester is removed, all metadata records associated with that harvester are removed.

Multiple harvesting and hierarchies

Catalogues that use UUIDs to identify metadata records (eg. GeoNetwork) can be harvested several times without having to take care about metadata overlap.

As an example, consider the GeoNetwork harvesting type which allows one GeoNetwork node to harvest metadata records from another GeoNetwork node and the following scenario:

  1. Node (A) has created metadata (a)
  2. Node (B) harvests (a) from (A)
  3. Node (C) harvests (a) from (B)
  4. Node (D) harvests from both (A), (B) and (C)

In this scenario, Node (D) will get the same metadata (a) from all 3 nodes (A), (B), (C). The metadata will flow to (D) following 3 different paths but thanks to its UUID only one copy will be stored. When (a) is changed in (A), a new version will flow to (D) but, thanks to the change date, the copy in (D) will be updated with the most recent version.

Harvesting Fragments of Metadata to support re-use

All the harvesters except for the THREDDS and OGC WFS GetFeature harvester create a complete metadata record that is inserted into or replaces an existing record in the catalog. However, it's often the case that:

  • the metadata harvested from an external source is really only one or more fragments of the metadata required to describe a resource such as a dataset
  • you might want to combine harvested fragments of metadata with manually entered or static metadata in a single record
  • a fragment of metadata harvested from an external source may be required in more than one metadata record

For example, you may only be interested in harvesting the geographic extent and/or contact information from an external source and manually entering or maintaining the remainder of the content in the metadata record. You may also be interested in re-using the contact information for a person or organisation in more than one metadata record.

To support this capability, both the WFS GetFeature Harvester and the THREDDS harvester, allow fragments of metadata to be harvested and linked or copied into a template record to create metadata records. Fragments that are saved into the GeoNetwork database are called subtemplates and can be used in more than one metadata record.

As shown above, an example of a metadata fragment is the gmd:contactInfo element of an iso19139 document. This element contains contact details for an individual or an organisation. If a fragment is stored in the GeoNetwork database as a subtemplate for a given person or organisation, then this fragment can be referenced in metadata records where this organisation or individual is specified using an XML linking mechanism called XLink.

HTTPS support

Harvesting between GeoNetwork nodes may require the HTTPS protocol. If harvesting from an https GeoNetwork URL, the server will need to have a trusted certificate available in a JVM keystore accessible to the GeoNetwork node running the harvest.

If you don't have a trusted certificate in the JVM keystore being used by GeoNetwork, the harvester may issue an exception like this when you try to harvest from the https GeoNetwork:

javax.net.ssl.SSLHandshakeException:
   sun.security.validator.ValidatorException: PKIX path building failed:
   sun.security.provider.certpath.SunCertPathBuilderException:
   unable to find valid certification path to requested target

Caused by: sun.security.validator.ValidatorException:
   PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException:
   unable to find valid certification path to requested target

Caused by: sun.security.provider.certpath.SunCertPathBuilderException:
   unable to find valid certification path to requested target

The server certificate for the GeoNetwork server being harvested needs to be added to the JVM keystore with keytool in order to be trusted.

An alternative way to add the certificate is to use a script like:

## JAVA SSL Certificate import script
## Based on original MacOs script by LouiSe@louise.hu : http://louise.hu
##
## Usage: ./ssl_key_import.sh <sitename> <port>
##
## Example: ./ssl_key_import.sh mail.google.com 443 (to read certificate from https://mail.google.com)

## Compile and start
javac InstallCert.java
java InstallCert $1:$2

## Copy new cert into local JAVA keystore
echo "Please, enter administrator password:"
sudo cp jssecacerts $JAVA_HOME/jre/lib/security/jssecacerts
# Comment previous line and uncomment next one for MacOs
#sudo cp jssecacerts /Library/Java/Home/lib/security/

To use the script, the Java compiler must be installed and the file InstallCert.java, must be downloaded and placed in the same directory as the script.

The script will add the certificate to the JVM keystore, if you run it as follows::

$ ./ssl_key_import.sh https_server_name 443

The main page

To access the harvesting main page you have to be logged in as an administrator. From the administration page, select the harvest shortcut. The harvesting main page will then be displayed.

The page shows a list of the currently defined harvesters and a set of buttons for management functions. The meaning of each column in the list of harvesters is as follows:

  1. Select Check box to select one or more harvesters. The selected harvesters will be affected by the first row of buttons (activate, deactivate, run, remove). For example, if you select three harvesters and press the Remove button, they will all be removed.
  2. Name This is the harvester name provided by the administrator.
  3. Type The harvester type (eg. GeoNetwork, WebDAV etc...).
  4. Status An icon showing current status. See Harvesting Status and Error Icons for the different icons and status descriptions.
  5. Errors An icon showing the result of the last harvesting run, which could have succeeded or not. See Harvesting Status and Error Icons for the different icons and error descriptions. Hovering the cursor over the icon will show detailed information about the last harvesting run.
  6. Run at and Every: Scheduling of harvester runs. Essentially the time of the day + how many hours between repeats and on which days the harvester will run.
  7. Last run The date, in ISO 8601 format, of the most recent harvesting run.
  8. Operation A list of buttons/links to operations on a harvester.
    • Selecting Edit will allow you to change the parameters for a harvester.
    • Selecting Clone will allow you to create a clone of this harvester and start editing the details of the clone.
    • Selecting History will allow you to view/change the harvesting history for a harvester - see Harvest History.

At the bottom of the list of harvesters are two rows of buttons. The first row contains buttons that can operate on a selected set of harvesters. You can select the harvesters you want to operate on using the check box in the Select column and then press one of these buttons. When the button finishes its action, the check boxes are cleared. Here is the meaning of each button:

  1. Activate When a new harvester is created, the status is inactive. Use this button to make it active and start the harvester(s) according to the schedule it has/they have been configured to use.
  2. Deactivate Stops the harvester(s). Note: this does not mean that currently running harvest(s) will be stopped. Instead, it means that the harvester(s) will not be scheduled to run again.
  3. Run Start the selected harvesters immediately. This is useful for testing harvester setups.
  4. Remove Remove all currently selected harvesters. A dialogue will ask the user to confirm the action.

The second row contains general purpose buttons. Here is the meaning of each button:

  1. Back Simply returns to the main administration page.
  2. Add This button creates a new harvester.
  3. Refresh Refreshes the current list of harvesters from the server. This can be useful to see if the harvesting list has been altered by someone else or to get the status of any running harvesters.
  4. History Show the harvesting history of all harvesters. See Harvest History for more details.

Harvesting Status and Error Icons

Harvesting result tips

When a harvester runs and completes, a tool tip showing detailed information about the harvesting process is shown in the Errors column for the harvester. If the harvester succeeded then hovering the cursor over the tool tip will show a table, with some rows labelled as follows:

  • Total - This is the total number of metadata found remotely. Metadata with the same id are considered as one.
  • Added - Number of metadata added to the system because they were not present locally.
  • Removed - Number of metadata that have been removed locally because they are not present in the remote server anymore.
  • Updated - Number of metadata that are present locally but that needed to be updated because their last change date was different from the remote one.
  • Unchanged - Local metadata left unchanged. Their remote last change date did not change.
  • Unknown schema - Number of skipped metadata because their format was not recognised by GeoNetwork.
  • Unretrievable - Number of metadata that were ready to be retrieved from the remote server but for some reason there was an exception during the data transfer process.
  • Bad Format - Number of skipped metadata because they did not have a valid XML representation.
  • Does not validate - Number of metadata which did not validate against their schema. These metadata were harvested with success but skipped due to the validation process. Usually, there is an option to force validation: if you want to harvest these metadata anyway, simply turn/leave it off.
  • Thumbnails/Thumbnails failed - Number of metadata thumbnail images added/that could not be added due to some failure.
  • Metadata URL attribute used - Number of layers/featuretypes/coverages that had a metadata URL that could be used to link to a metadata record (OGC Service Harvester only).
  • Services added - Number of ISO19119 service records created and added to the catalogue (for THREDDS catalog harvesting only).
  • Collections added - Number of collection dataset records added to the catalogue (for THREDDS catalog harvesting only).
  • Atomics added - Number of atomic dataset records added to the catalogue (for THREDDS catalog harvesting only).
  • Subtemplates added - Number of subtemplates (= fragment visible in the catalog) added to the metadata catalog.
  • Subtemplates removed - Number of subtemplates (= fragment visible in the catalog) removed from the metadata catalog.
  • Fragments w/Unknown schema - Number of fragments which have an unknown metadata schema.
  • Fragments returned - Number of fragments returned by the harvester.
  • Fragments matched - Number of fragments that had identifiers that in the template used by the harvester.
  • Existing datasets - Number of metadata records for datasets that existed when the THREDDS harvester was run.
  • Records built - Number of records built by the harvester from the template and fragments.
  • Could not insert - Number of records that the harvester could not insert into the catalog (usually because the record was already present eg. in the Z3950 harvester this can occur if the same record is harvested from different servers).

Adding new harvesters

The Add button in the main page allows you to add new harvesters. A drop down list is then shown with all the available harvester protocols.

You can choose the type of harvest you intend to perform and press Add to begin the process of adding the harvester. The supported harvesters and details of what to do next are in the following sections:

Harvest History

Each time a harvester is run, it generates a status report of what was harvested and/or what went wrong (eg. exception report). These reports are stored in a table in the database used by GeoNetwork. The entire harvesting history for all harvesters can be recalled using the History button on the Harvesting Management page. The harvest history for an individual harvester can also be recalled using the History link in the Operations for that harvester.

Once the harvest history has been displayed it is possible to:

  • expand the detail of any exceptions
  • sort the history by harvest date (or in the case of the history of all harvesters, by harvester name)
  • delete any history entry or the entire history